MD1600: Remote Management

If you'd like to be able to make configuration changes to your MD1600 while you are away from your home network, please follow these instructions:

Open your web browser (Internet Explorer, Chrome, Safari, etc.) Type in 192.168.0.1 into the address bar. When prompted, enter admin your username and motorola for your password, all lower case. Click Login

Select Advanced on the top right-hand side.

From the menu on the left-hand side, select Management > Access Control > Services Control

Make sure the following is setup:

Services LAN LAN Port WAN Port
HTTP ✓ Enable 80 ✓ Enable 80

Select Apply/Save 

On the top right-hand side of the page, select Back to Basic Setup > Status 

Here you will need to write down the Internet IP Address address listed. 

Once you have that Internet IP Address written down you will now want to go to a device that is not connected to your router or network and type the Internet IP Address into your browser's address bar. That should bring you to the familiar Motorola login page.

Have more questions? Submit a request

0 Comments

Article is closed for comments.