MR1900: Setup and Installation

MR1900 AC1900 WiFi Gigabit Router with Power Boost

 Setup & Installation: Router Setup & Installation

  • Setup the MR1900
    • Connect the provided yellow Ethernet cable to the MR1900’s WAN port on the back of the unit and the other end to the Ethernet port on a Cable modem, DSL modem, Fiber Optic modem or existing in-building network.
    • If you are using a modem, turn it off for 10 seconds and then turn it back on.
    • Plug your MR1900 to power by attaching the round end to the back of the unit and the power adapter to an electrical outlet.
      • Press the On/Off button on the side panel of the MR1900 and wait for the white internet connection light (modeled after a globe) to be blinking, this can take up to 2 minutes
    • Ensure that the following lights on the top of the MR1900 are on before moving forward.
      • Power
      • WAN
      • Internet
      • 4GHz & 5GHz
    • If the 2.4GHz & 5GHz lights are off, press and hold the WiFi On/Off button on the side panel for 1 second and check again.
    • At this point, most users will get their devices online by connecting them to the MR1900 with Ethernet cables or wirelessly.
      • When browsing for wireless networks, look for default networks named MOTO1234 or MOTO1234-5G and connect to them using the wireless password/key printed on the bottom of the MR1900. The default Network Name/SSID is also printed right above the wireless password/key on the bottom of the MR1900.

 

You can also email or call our technical support team for more wireless optimization for your MG7310:
support@motorolanetwork.com or call us at 1-800-753-0797 (Monday-Friday 8:30am-10pm.  Saturday 8:30am-5pm Eastern Time).

Have more questions? Submit a request

0 Comments

Please sign in to leave a comment.